Arducam UC-261 ball mount

This is a remix-of-the-remix of thing:4601248 by smarc....who remixed this cam mount from lab27 thing:3121052 "Prusa I3 MK3 Raspberry Pi Camera Mount"

I actually used this with the remix of that mount by inomad360 thing:4514535 so the camera is on top of the arm. I put text of the camera model to indicate the top of the cover, because I had to move the hole up to fit properly.

I basically added screw holes for the UC-261 camera. (I left the original ones so it should be compatible with both) I used M2-6mm screws with M2 washers.

https://www.amazon.com/Arducam-Camera-Raspberry-Interchangeable-M12x0-5/dp/B013JTY8WY/ref=sr_1_17?crid=1LECGHU49I31Q&keywords=uc-261+raspberry+pi&qid=1636085599&sprefix=uc-261+raspberry+pi%2Caps%2C133&sr=8-17

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Supports:

Yes

Resolution:

0.15mm

Infill:

20%

Filament:

Prusa Orange

Notes:

manually brush in supports underneath the ball, don't put supports on the neck otherwise the supports will go into the ribbon cable slot.