Mount to attach BL-touch to Kingroon E3DY Direct Drive Extruder

This is a simple mount to attach a BL-rouch to the new Kingroon E3DY extruder.
https://de.aliexpress.com/item/1005005045529107.html?spm=a2g0o.productlist.main.3.5dd9RFFuRFFuEs&algo_pvid=6d696c9e-1f31-4c71-b10b-7fe9791460a9&algo_exp_id=6d696c9e-1f31-4c71-b10b-7fe9791460a9-1&pdp_ext_f=%7B%22sku_id%22%3A%2212000031438710696%22%7D&pdp_npi=2%40dis%21EUR%2193.7%2136.55%21%21%21%21%21%402100b69816735391020238928d0730%2112000031438710696%21sea&curPageLogUid=B94VWMH9sUnP

Beware! My extruder came wit the PTFE-tube not going into the heatbreak! No filament guide to the nozzle which resulted in immediate jam. The thumbscrew of the extruder is at least a millimeter too long. Needs shortening on the benchgrinder!
After fixing this, the extruder works fine. And even finer with this fine mount! ;)

Prints without support in PLA no fuzz no buzz.

OpenSCAD file included as always for easy adaption.

Enjoy

Cheers

Armin