GK420d & GX420d Left Bearing (Roller clip)

Left bearing roller clip for GK420d & GX420d thermal printers.

Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left. 

While the original listed here; https://www.thingiverse.com/thing:3689058 , is for the right side, it was too tight for me so I modified it. You can find my modified version (right clip) here: https://www.printables.com/model/365110-gk420d-gx420d-right-bearing-roller-clip

Slice with the tab in the upright position as shown in the rendering. Supports are necessary 

Slicer settings

Layer Height: 0.2

Infill: 100%

Support Placement: Touching Buildplate

Support Overhang Angle: 30°

The printed pieces shown were printed with a 0.6 nozzle. While it worked ok, I would recomend a 0.4 nozzle. Presliced model uses a 0.4 nozzle

Fit can be a little tight at first but after some repetitive movements, it loosens up nicely.