Never Lost Samla Clip (5l+11l+22l)

Thank you. The hot glue gun works well.

Prints and works perfectly. MUCH better than the ones Ikea sells.

I ran out of filament part way through printing some and they still came out perfectly usable. (modifié)

Fits perfectly

Great and easy print def gonna print more. Printed in PETG

Works great on my box with gasket, but also without gasket! Maybe this will be my choice for my box-collection^^
I just have to add some double sided tape to the lower block.

Samla 22L box ordered from IKEA online in Germany in July 2025
Used seal: Window Gasket 9x6mm D-profile (glued on the box, not on the lid)
Bambu Lab X1 Carbon
0.20mm Standard @BBL X1C with wall loops 3
eSUN PLA+

Edit: I printed now in total 8 of them to test them on my box. They are not super tight, which is good, because the lid is not bend so strongly as for other clips it is happening. (modifié)

If you are using some foam to have a seal, this is the best clip design out of many variants available. It's not perfect on its own, but with the seal it's perfect.

3x15 is the seal size I have used
 https://www.aliexpress.com/item/1005006150663741.html

the moisture in the boxes aren't rising for several month now so its a really a perfect solution (modifié)

Great design — thanks for sharing! The print was very fast. I ended up using the remix for most of my bins, as it provided a better seal. Nonetheless, this is a fantastic design.

That is one useful, satisfying print! It works perfectly, thanks

My absolute favorite clips.
Glued them to the box with thin 3M double-sided tape.