Test Card

If you have seen the development of my prints that take a 2d image to create a 3d print, this print is a guide for getting the best settings.

I have posted a video of the process from image to print on YouTube.

You can download the necessary files here on GitHub

https://github.com/Blunstone/pixel

Please message me if you have any questions

Print instructions

The basic idea is to print cyan, magenta, yellow and black filaments, all as a first layer followed by a backing layer.

All of the settings can be found in the video.

For the print shown here the resolution is 0.35mm and I also set the extrusion multiplier at 0.95