Eufy Video Doorbell Angled Shims

Eufy Video Doorbell 2k angled shim to be used in conjunction with the provided left/right angled bracket. The shims included are specific if the Eufy angled bracket angles to the right (angled to the left when looking directly at the camera). The models could be mirrored to be utilized for the left as well. Two shims included to angle the camera down either 7.5or 10.

This is not the most eloquent design, but it accomplishes the goal.

Notes:

-This is installed between the wall and angled bracket.

-This will not work without the angled bracket as it does not interface correctly with the camera mount.

-You can use the Eufy provided screws with the 7.5shim, but the 10 shim will require one longer screw.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

10

Filament: Sunlu PETG Black

Notes:

10* shim takes approximately 2hr45min to print at 50mm/s with the listed settings on my Ender 3 V2.