This is a simple USB data drive storage rack. There are five slots per print, and they can aligned together using the two pins on the male and two holes on the female variant.
The back is angled at 55 degrees, in order to best fit on the topology of my desk, and to present the USB sticks at a convenient angle for retrieval and storage.
You can align as many as you need, so long as you have the desk space.
Use you normal slicer settings, I would recommend a very small amount of support material between the two male pins, and printing the correct way up - this way the USB slots maintain dimensions and so long as your machine is calibrated the very minor supports should break off cleanly and without issue.
The author marked this model as their own original creation.