I made this tool because I received cases of coffee from Gevalia. It requires you to cut in two of the foil top and it cannot just be manually pulled off from the sides. If I used a knife coffee would go everywhere, so I decided to make a shredder that would shred the aluminum top and make it easy to pull off the aluminum foil to get the coffee out. Not sure how helpful this might be to people but it is very helpful to me and if you find yourself in the same situation where you have coffee in one pod type and you need to move it to another, it may be useful. The build is simple you can build it at any height I used a .6 millimeter nozzle, and it made the points just fine. To use the shredder place the pod on a surface and press down with the shredder in the middle of the pod then rotate. This may also be used with a K-Cup in case your need was there to remove the coffee from it.
The author marked this model as their own original creation.