AGM-69A Missile (SRAM)

This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer.

My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based on drawings and technical specifications provided by Ron Caudillo.

I have included the Missile alone and a Missile with a slot for the stand as well as the stand itself.

I print the missile standing on its tail cone and fins. I suggest using a raft or a brim since the tail fins are rather thin on the surface.

Print instructions

Category: 3D Printing Summary

This is a full size rendering of an AGM-69A Missile. Cura resizes it for me to 5% so keep that in mind when loading into your slicer.

My wife and I worked on this Missile System during our 20 years in the Air Force. The 3D Model is based on drawings and technical specifications provided by Ron Caudillo.

I have included the Missile alone and a Missile with a slot for the stand as well as the stand itself.

I print the missile standing on its tail cone and fins. I suggest using a raft or a brim since the tail fins are rather thin on the surface.