Upgraded Ratchet Toothpaste Tube Squeezer

I really loved the original model of this toothpaste squeezer but it kept on jamming.

I've made a few modifications and I think now works really well.

Thank you @Luke's 3D for the original design!

I've printed this in Prusament PETG with 0.15 layer height(works as well in 0.2).

08.01.2024 Update

I've added a new folder containing a tighter tolerance version. The update applies to the body, shaft and nut. The body is slightly longer now, with the logo removed and a few other modifications to the top overhang to print better. I've also applied the according length to the shaft. The rest of the parts can were not modified in any way.

12.12.2023 Update

Made a profile of this model on Maker World, for those of you that use a Bambu lab 3d printer. Look for the same name. I can't use any link as Printables and Maker World don't talk to each other. :)

29.07.2023 Update

I've made the body a little bit taller to fit better with the shaft.

04.02.2023 Update

     I've added some more tolerance to the threaded shaft and nut and I've uploaded the new ones. 

Changed the original body and shaft to be longer and with less overhang for an easier print; also added a nut on top for a sturdier and more precise experience. 

It's a lot more reliable now.