Storage Pot

I wanted a little pot I could put salt in that looked good in my kitchen. I wanted it to be support free so opted for a little bit of assembly.

I've included the file I made for the entire thing so I could get all the sizes right so if you want to modify, use that one and then split up or just use the individual ones.

I printed out of PLA and glued with super glue but use whatever material you want. Recommend using a brim on the shell as it has a very small initial print area.

The lid is quite light so I should really modify to allow a weight to be used but to be honest, it's a pot to hold salt, so I don't want to put more effort in than it's worth.