Cablemanagement Original Prusa Enclosure

I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also offers enough space for other extensions.

Update:

27.01.2023 > Added CableCoverHolder_HingedLid.3mf for those who use the Hinged Lid addon

What Parts do you need?

For LED strip you only need to Print CableCoverLong.3mf and three CableCoverHolder.3mf

• 3x Screws M3 x 6mm
• 3x Hexagon nuts M3

________________

If you have the Advanced Filtration System you need to Print CableCoverLong.3mf, CableCoverShord.3mf, and nine CableCoverHolder.3mf.

• 9x Screws M3 x 6mm
• 9x Hexagon nuts M3

In case you use Hinged Lid addon you need to replace two CableCoverHolder.3mf with the CableCoverHolder_HingedLid.3mf ones an two Screws to M3 x 10mm!

Attension! One of the Covers for Advanced Filtration System has a short recess for the cable so dont use the wrong one :-)

Material

• Screws M3 x 6mm
• Screws M3 x 10mm
• Hexagon nuts M3

You like my Work? 

Check out my other Enclosure Addons

Support my efforts and push the like  ❤

Make my day and post yout Makes

Print instructions

Simple print

No support needed

PETG or PLA on 0.2mm, 100% Infill and 3 Parameters of course with original Prusament!

Happy Printing!!!