Dell AC511 P2219H monitor mount

This is a VESA mount for the Dell AC511 soundbar, intended to be used with the Dell P2219H LCD monitor. The adapter was inspired by sunny_raven's design but is a complete redesign from scratch made to fit the smaller Dell monitor.

This mount requires the monitor to be mounted to an arm or other mounting setup that utilizes the VESA mount and does not block access to the bottom two screws. A desktop stand will not work.

The soundbar is set back slightly to allow easy access to the buttons along the bottom right side of the monitor.

You will need four M3 thread inserts, I used McMaster 94180A331.

You will need four M3x6mm socket head cap screws to attach the two halves of the mount. The exact length is not critical.

You will need two M4x20mm screws to attach the mount to the monitor. The exact length will depend on the thickness of your existing VESA mount.