earring support

This is a support that can hold long and short earring
the grid is not on the model but it's the infill with a high % (1,5mm) with no top or bottom

Print instructions

Category: 3D Printing Summary

This is a support that can hold long and short earring
the grid is not on the model but it's the infill with a high % (1,5mm) with no top or bottom

Print Settings

Printer Brand: Anet

Printer: A8

Rafts: No

Supports: No

Resolution: 0,2

Infill: 30

Filament: Ice filament PLA
Notes:

Top thicknesse = 0
bottom thicknesse = 0
infill 1.5mm