Prusa MK3s switch holder

2 switchs holder mounted on original MK3S Lcd support.

It's design for this switch :
https://fr.aliexpress.com/item/4000138435058.html?spm=a2g0s.9042311.0.0.54d26c37NOTyTl

type: SPST
on-off 2 states
AC 250 V/15A 125 V/20A
3 pins
inner size: 27mm x 10mm/1.09 "x 0.4" (L W)
full size: 31mm x 14mm x 35mm/1.2 "x 0.6" x 1.4 "(L W* H)

There 3 versions :
M3, M4 or M5 screw and nuts (M' and M5 not tested)

Have fun and let me know if something wrong ;)

Print instructions

Category: 3D Printer Parts Summary

2 switchs holder mounted on original MK3S Lcd support.

It's design for this switch :
https://fr.aliexpress.com/item/4000138435058.html?spm=a2g0s.9042311.0.0.54d26c37NOTyTl

type: SPST
on-off 2 states
AC 250 V/15A 125 V/20A
3 pins
inner size: 27mm x 10mm/1.09 "x 0.4" (L W)
full size: 31mm x 14mm x 35mm/1.2 "x 0.6" x 1.4 "(L W* H)

There 3 versions :
M3, M4 or M5 screw and nuts (M' and M5 not tested)

Have fun and let me know if something wrong ;)

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.3

Infill: 15%

Filament: Prusament PLA - PETG Galaxy black
Notes:

It's design to use less supports. The design is made with small gap for 0.3 printing.

Post-Printing

remove support, glue if necessary block_support_Mx and button_block.

insert in original lcd support and use a Mx screw and not to lock all in place.