Bill banzai cannon stand

This is the banzai bill cannon of the mario bros universe.
It allows you to stage your banzai bill.

this cannon stand was made to use with the great 3D forge model https://www.myminifactory.com/object/3d-print-bullet-bill-26743

it is made to print it with the least support, to reduce printing time and use least filament.

if you want to tilt more than 7° angle the barrel, print long version.
I had version of barrel to keep bill a little bit outside it with inside pins (see picture)

If you need some modifications, do it or let me know ;)

Print instructions

Category: Models Summary

This is the banzai bill cannon of the mario bros universe.
It allows you to stage your banzai bill.

this cannon stand was made to use with the great 3D forge model https://www.myminifactory.com/object/3d-print-bullet-bill-26743

it is made to print it with the least support, to reduce printing time and use least filament.

if you want to tilt more than 7° angle the barrel, print long version.
I had version of barrel to keep bill a little bit outside it with inside pins (see picture)

If you need some modifications, do it or let me know ;)

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 10%-15%

Filament: Geeetech (black) / Eryone (white) PLA black and white
Notes:

it is made to print it with the least support, to reduce printing time and use least filament.

you can scale it. I only try 50% smaller, it's not perfect but it works (see pictures).

Post-Printing

Just remove supports, glue pirate head on basis sides and mount pieces together.

Enjoy !