N3o : LACK POWER [also userd in N3o lack enclosure]

To my lack I added a socket to power all the electronic components present in the structure.

1) Bought power connector from amazon:
https://www.amazon.it/gp/product/B07RRY5MYZ/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

2) I created this support that is fixed on the ceiling or on the floor of the lack at will and allows you to hook the connector between my support and the glass (or other closure) of the lack.
If you don't have a lack closing panel, it doesn't matter much you can fix the connector directly to the support without having the dividing panel in the middle.
The fixing holes are always for 3mm screws with 7mm head

3) print the component without requiring supports

4) make a square hole on the 47mm x 27.5mm panel on the lack cover (if you use it)

5) fix the support to the lack (or other table)

NOTE
on my profile other components to complete the lack structure

Print instructions

Prusa MK3s
0.20
No support