Maytag / Whirlpool Dishwasher PCB clip replacement

Replacement PCB holders for the Control Panel from a whirlpool / Maytag dishwasher.

Apparently as the dishwasher gets old the clear plastic clips get crisp and can break off while pressing the buttons.

This causes board to move as you press the buttons and resulting in the buttons not being depressed.

The black brackets were crispy as well and the back sides broken... but the front side holding the circuit boards on this one where not broken so we did not print a fix.

This is TPU Flex. You need to be able to flex the sides in to get the clips in place to hold the bracket in place. They don't look to want to come out... if concerned glue something in the center gap left to allow the pins to flex into place so they cannot come together.

This board was W10708707 ... so thats about $260 saved... $140 on the after market since they only sell the entire assembly.