Business Card Laptop - Case and Display!

A small update: got rid of the pin and designed a snap hinge. 

Also, I made some small changes to the monitor and added small supports (even more then to see in the pictures) for the slot.

They are easily removed with a precision knife and give a cleaner result.

The new print file is called CardLaptop.

• Laptop printed at 0.2mm on a Flsun Q5.

For the old model: 

• Clean the holes with a 2.5mm drill and push (light pounding) the pin in.
• When in place, cut the got over off with a side cutter.

For the new model:

•  Clean the supports, then just snap the parts together!

The Sleeve is designed to print it in vase mode for a 0.6 nozzle and a line width of 1mm. 

So be careful and readjust the size for your circumstances to print it properly!

The handle is only glued and will probably break off, but it just looks cool.

So have fun printing and please leave a like!