Bambu Side Filament Holder
This is a remix of Ktothestank. His model had a rounded corner for the bend and would work with the peg board cover.
10
46
0
853
updated January 7, 2023
Description
PDFYou can print in PLA but I would print in ABS or better. You will need 3 M3x20 bolts to mount it on the back. It snaps together but there are 3 holes where you can bolt together. For that you will need 3 M3x6 bolts.
.2 layer
25 to 50% infill
3 walls
Tags
Model origin
The author remixed this model.
