Pond Plant Base

If your pond plants keep falling over due to heavy wind, then this model is the solution! The base is designed for square planters that are 90mm square at the bottom, and 95mm square at a height of 60mm (scale the model according you your planter size).

Due to the use case of this model, you can print it at large layer heights with low infill percentage. For me, the print took just under 2 hours. Once printed, simply click the two halves together. The clearances of the model should result in a nice fit between the two parts.

Support

If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h

Whenever you buy something through this link, I get a small kickback without costs for you :)

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.30mm

Infill: 20%

Filament: Prusament PLA Galaxy Black
Notes:

Since this print will be used underwater, I assume the PLA will hold up for quite some time. If you're unsure about the durability of PLA, you can print it in something more durable and temperature resistant, like Prusament ASA (which is also UV stable).