Monster energy stand

I've designed this customizable stand for Monster energy bottles because of spitting the content multiple times over my whole desk :D 
It fits perfectly so the holder sticks to the bottle when its inserted. If your 3d printer is not perfectly percise you might want to set the innerdiameter to 66.5 or 67.

To customize / compile it yourself, you need the BOSL SCAD Library (https://github.com/revarbat/BOSL)

If you want the Monster logo on it as well, just grab the monster_energy_1.stl from unknownhands https://www.thingiverse.com/thing:44542 and put it in the same folder.
To make it work, make sure you dont make the outerdiameter smaller than 153 or you have to change the scaling and the logic.

I know the SCAD logic is not optimal but for a quick and dirty customisation its more than enough.

You can customize the following variables:

$monsterlogo=true; | enable / disable the logo
$overallfn=300; | fn for rendering
$outerdiameter=165; | diameter of the ground plate
$outerhigh=2; | hight of the ground plate
$innerhigh=55; | hight of the tube
$innerdiameter=66.2; | inner diameter of the tube
$innerthickness=2; | thickness of the tube
$outerconnectorthickness=8;  | thickness of connector between the tube and the ground plate

I don't think there are much requirements to the material in this print, i got only the prusament PETG black at the moment, so i used that.