ETC Response Midi SMPTE Gateway Mount

This is a mount for the ETC line of Response Midi / SMPTE Gateway.

You will need 2 to mount the device. It can be screwed down or use a couple of tie wraps to mount to a single space, rack mount filler plate.

Just remove the 4 rubber pads in the extrusion and snap 1 mount onto each end.

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

1.5

Infill:

20%

Filament: Gizmodorks PETG BLACK