Orange Pi 5/5B case V3

2023-04-19 V3 - I am pleased to share with you the latest updates for the V3 model of 5/5B variants. Here are the key improvements that have been made:

- The annoying PCB clips have been removed.

- A clip has been added to the top for Wifi antennas on 5B.

- The top has been thickened to flex less.

- Internal walls now have an additional 0.2mm room for the board, making it easier to insert the board.

- The button has been improved for ease of use.

- We now have short/tall and with-ssd/without-ssd lid variants available.

Antennas clip in action: https://www.reddit.com/r/OrangePI/comments/12skkb7/orange_pi_5b_case_update_v3_enjoy/

 

Here are the updates for the V2 model:

- Addition of a power button
- Improved SD card access
- Removable SSD lid that clips in place
- Support for 40mm and 30mm fans
- Two height variants, with the taller model able to fit 3020 or 4020 fans easily (although not yet tested).

Required hardware:

• Short M3 screws to hold the unit base and more if you want to secure the lid.
• Optional 30x10mm 5v fan. I have 30x8mm fan that fist inside

Video Demo putting it together: The OrangePi micro PC (reddit.com)