Vibration Dampening Speaker Feet

You can place this pad underneath your speakers to reduce the transfer of vibrations.
Note that this design won't help if you print it in rigid materials like PLA, ABS, etcetera.
I printed it in ColorFabb nGen Flex, but any (semi-)flexible material should work fine!

The print orientation should be like the render, but when you place it underneath a speaker,
you should flip it (the side that was attached to the print bed should be touching the speaker).

If you have a larger or smaller speaker, you can scale the X and Y size of the deisgn. Current dimensions are 73 mm x 73 mm x 10 mm. I would suggest leaving the height at a minimum of 10mm, as decreasing this could hurt the vibration dampening properties of this design.

Support

If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h

Whenever you buy something through this link, I get a small kickback without costs for you :)

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 10%

Filament: ColorFabb nGen Flex Black
Notes:

I used two perimeters, 4 bottom layers and 5 top layers. This ensures that the top and bottom are nice and strong, whilst having a flexible/vibration dampening "core".