Tube Frame Desk Organizer Stand

This is a sort of desk organizer stand thing that I used to store things on my desk more efficiently (using height instead of desk surface). The width and depth of this design are fixed (because of the plate dimensions), but you can choose whatever size you want for the height.

I used some carbon fiber wrap (from AliExpress, link below) to make the tubes look a little better ;)

The tube dimensions I used are (all tubes are 13x1mm in terms of OD and wall thickness):

• Horizontal tubes, short - 119mm (4x)
• Horizontal tubes, long - 184mm (4x)
• Vertical tubes (you can choose your own length here if you want) - 90mm (4x)

With these lengths, the outer dimensions of the organizer stand are: 149 x 214 x 125mm
(width x depth x height). However, as mentioned before, the total height is adjustable. Besides these tube lengths, you will need to print both corner types (top and bottom) 4 times.

Support

If you'd like to support me for the 3D models I distribute for free, you can use the following AliExpress affiliate link: https://s.click.aliexpress.com/e/_AoUC8h

Whenever you buy something through this link, I get a small kickback without costs for you :)

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.2mm

Infill: 15%

Filament: ColorFabb PLA/PHA Semi-matte Black

Notes:

You will need support for the corner pieces only. The plates can be printed without supports.