Clothes Rail Bracket Parametric

A bracket for a clothes rail that can be printed very quickly and adapted to the size of screws and pole that you have available. Useful for converting a cupboard into a wardrobe, or for replacing broken parts.

The example I have prepared is for a pole of diameter 25.5 mm and 4 mm screws, but you can set these to what you like within the parametric model. I recommend printing from PETG for strength.

Be careful not to use a pole too long to support the weight of clothes on its own - centre supports are not included. It may also be a good idea to print in a different orientation, if layer separation/shearing is a concern for you.