Button Long Snail Shell Parametric 5cm

One of my organic experiments. The bottom side is flatten for sitting better on fabric. Prints pretty well from wooden PLA, possibly from some other materials as well. I set the length to 5cm. Finally I resized it to 130% in the slicer for printing.

You may play with the parameters in OpenSCAD to feel the geometry if you like.

Print instructions

Printer brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: Yes
Resolution: 0.15mm
Infill: 20%
Filament_brand: any
Filament_color: wood
Filament_material: PLA (wooden or bamboo)
Post-Printing: Light sanding can be applied if you use wooden PLA