Prusa MK2(S) steel sheet adapters (for MK42 bed)

Adapters to hold the spring steel sheets on the MK42 bed of my Prusa MK2S Bear clone.
I suggest printing the low profile adapters if you have fan shrouds that are reaching closer to the bed.

I printed my parts with ABS-P filament from Azurefilm and they seem to hold fine when I'm printing ABS parts with bed temp at 95°C

The adapters clip on the hexagon metal spacers below the heatbed.

Before first print you have to readjust Live Z. I suggest only a Live Z calibration.
If you do XYZ calibration, you should remove the steel sheet, like it is done with MK2.5 and MK3.

Solidworks files also available if you want to make modifications.
Cheers :)

Print instructions

• filament: ABS-P (from Azurefilm)
• infill: 20%
• supports: no
• rafts/brims: no

Link to ABS plus filaments from Azurefilm:
https://www.azurefilm.com/en/abs-plus-filaments