Flex Tablet Holder

A scaled up version of my flex phone holder. Tested with a 10.5" and 9" tablet.

Printed in PETG and flexible filament, for example TPU. Infill for flexible filament depends on how flexible the material is. Mounted either using M5 hex screw/nut or a 1/4-20 screw (camera/tripod thread).

As always, if you find it useful a tiny donation goes a long way to show appreciation.

Hardware needed (for stand):
1 pcs M5x15 hex head screw
1 pcs M5x20 hex head screw
2 pcs M5 nut
1 pcs M5 washer

Print instructions

No support, print holder in PETG 15% (standard settings)

Stand can be printed in PLA or PETG but the latter might feel too flexy.

The grips are printen in TPU 0-15% infill.