Maracca Noisy Toy

Print this maracca and make some noise!

The handle and bulb are printed separately so that the inside can be filled with a noise making medium. Print, Fill, Glue, Enjoy!

No supports needed. Orient the opening of the bulb down and place the flat end of the handle down.

I used metal BB's and they produced a nice rattle. After filling, I used a two part epoxy to seal it closed. Print with PLA since it is hard, which produces more noise than softer filaments.

WARNING! The contents of the rattle can present a choking hazard if the two parts separate. Use at your own risk. This is not a baby toy.

Material: PLA

Layers: 0.2mm

Supports: None

Infill: 15%