BEAR Patch - Escape From Tarkov

This is an Escape From Tarkov BEAR Patch that I decided to model and print, inspired by the patched sold on the official Tarkov merch store. I used images online of the BEAR logo and extruded it in Blender to create the patch, which looks great when using two filament colors.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

.2

Infill: 

100

Information

Printing

To print this, I used the Cura “pause at height” post processing script, which can be accessed by going to the Extensions tab at the top of the Cura window > post processing > Modify G-code, then select the pause at heigh script. This will make the printer automatically stop at the given layer height (right before the logo starts printing) so you can swap filaments.

After printing, I used a small piece of adhesive Velcro on the back so I could attach it to a chest rig or vest. Happy printing!

Disclaimer: This design includes a design of the BEAR logo which is the property of Escape From Tarkov. I do not claim ownership of the design of this logo and do not sell or profit from its use in this 3d model.

Category: Costume