Prusa Mk2/Mk2s/Mk2.5 storage bins for z-brace

If you have stiffened your Original Prusa Mk2 / Mk2s / Mk2.5 with Z-braces such as https://www.thingiverse.com/thing:1656945, then you can hang parts storage bins between the OEM 10mm rods and the lengthened 8mm rods to keep your memory cards, zip ties, etc.

Print a mirror-image for the left-side bin.

Print instructions

Unassociated tags: mk2.5, mk2.5s, prusa_i3_mk2.5, storage bin, z brace

Category: 3D Printer Parts Summary

If you have stiffened your Original Prusa Mk2 / Mk2s / Mk2.5 with Z-braces such as https://www.thingiverse.com/thing:1656945, then you can hang parts storage bins between the OEM 10mm rods and the lengthened 8mm rods to keep your memory cards, zip ties, etc.

Print a mirror-image for the left-side bin.

Print Settings

Printer Brand: Prusa

Printer: i3 MK2.5

Rafts: No

Supports: No

Resolution: 0.25mm

Infill: 15%

Filament: N/A PLA Black
Notes:

Supports/brims for the three clips are built into the model and can be snapped off or left in place.