BL Touch mount and X axis limit switch mod for Befenybay Direct Extruder Support Plate on Elegoo Neptune 2

The BL touch bracket is a new model, the X axis limit switch is a modification of the original STEP file from elegoo to move the x limit switch over to account for the reduced width of the plate. You'll need 2no M3 heatsets for the BL touch mount, plus 4No. m3x6mm button head screws. You'll also need a longer GT2 belt with crimp ends as the original is not long enough. The bl touch bracket incorporates a cable tie hook too.

I used a mini me duct and dragonfly BMS hotend, this is upto you as to what to use (the mini me duct just required a small modification with some side cutters to fit).