Logitech G27 Paddle Shifters Magnetic Ring

This ring mod can be installed without removing the steering wheel.

BOM
2 x M3x20-25 Cap Head Bolts
2 x M3 Nuts
4 x Ø6x2.5-3 axially magnetized magnets

Secure the magnets in place with superglue. Mount the ring on the wheel's hub and tighten the screws just slightly to be able to position the ring in place. Move the ring towards the paddle shifters until they make contact. Once centered tighten the screws to secure the ring in place.

Use a stiff material for the print (like PLA) for best results.

Print instructions

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 20%

Filament: Prusament PLA