Baghandle

Handle was printed with 4 walls, 4 bottoms and 4 top and with 15% gyroid infill

Pin was printed on its longest side with 9 walls, 9 bottoms and 9 top without infill

Connectorplate was printed with 6 walls, 6 bottom, 6 top and with 15% gyroid infill

Printed on an Ender 5 pro with borosilicate glassplate, a 0.6mm nozzle,

215 on the nozzle and 70 on the plate, after the  first layer the bed goes to 55

Took about 7 hours and 30 minutes to print everything.  

Handle took 2h37m for 1, need 2

Pin took 47m for 4

Connectorplate took 1h27m for 4

Glued everything with 2 part epoxyresin