Kingroom KP3S Z-Screw Stabilizer Fix
This is an updated version of Spool_Holder1+608zz_Bearing from https://www.thingiverse.com/thing:4635395 to better fit.
7
51
2
645
zaktualizowano
2 stycznia 2023
Opis
PDFIn the original part “Spool_Holder1+608zz_Bearing” the center peg was a bit larger than the gap of the frame. As a result the part would not go all the way down and fully hold the z-axis screw.
This part increases the tolerance for that peg allowing it to fit in the newer KP3S.
Tagi
Pochodzenie modelu
Użytkownik ponownie wgrał ten model. Użytkownik nie jest oryginalnym autorem modelu.
