Prusa MK3s Sunlu S2 drier mount

SunluS2 mount for the Prusa MK3s. 

Same style as previous Sunlu mount 

Both halves printed in 0.3mm Draft mode with 40% grid infill with 2 perimeters PETG

parts required to join too halves 

2x M3x16 cap head bolts 

2x m3 square nuts 

Additionally, mount can be attached to frame if you want to drill 2 x M3 holes at 30mm centres too centre of rail. haven't found need to do this on this design.

2 x m3 x12 csk cap head bolts 

2x m3 square nuts 

created Additional filament guide due to the S2 not having any front exit for the filament 

Parts for the filament guide 

1x M10 pass thru fitting 

2x m3x10 cap heads

2x m3 nuts. 

found the ideal entry point to be just at the end of the mold slots. my dilling wasn't perfect as you see in last photo