Minecraft 3B Case
I designed this Raspberry Pi 3B case to house a Minecraft server for my daughter. It is lit with a PiMoRoNi Blinkt!…
24
91
0
1117
mis à jour
2 janvier 2023
Description
PDFI designed this Raspberry Pi 3B case to house a Minecraft server for my daughter.
It is lit with a PiMoRoNi Blinkt! and is cooled with a 60mm 5V fan.
To pull 5V for the fan, I used SparkFun Qwiic Shim for Raspberry Pi
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament:
Hatchbox PLA
Notes:
-
The case requires supports -- if you can print soluble supports, that would work best. Otherwise, print*tree* supports touching the build plate. This was printed with black PLA.
The base does not require supports. Consider printing with a brim to avoid corners lifting. This was printed with black PLA.
The diffuser will require supports. This was printed with white PLA.
Post-Printing
You will need M4 x 30mm screws to attach the fan to the case. All other fasteners are M2.5.
Tags
Origine du modèle
L'auteur a marqué ce modèle comme sa propre création originale. Importé de Thingiverse.