A case for the narrow "two hole" version of the TCS3472 PCB from aliexpress/ebay.
You'll need to cut the two flanges of the PCB to make it fit. See the photos for cabling and assembly.
Use a 9x3 strip of perfboard cut to size for the I2C connectors and pins.
The two extra pins can be used to either
BTW: If you, like me, wonder about the difference between TCS3472 and TCS34725 - there is none, the latter is just the variant of the chip with address 0x29 and flexible, i.e. non 1.8V, I2C bus voltage.
Materials and methods
I used PETG as it is more flexible, PLA might break when you push both parts together.
Both parts can be printed without supports, if rotated accordingly.
Previously published at Youmagine
Category: RoboticsThe author marked this model as their own original creation. Imported from Thingiverse.