Ender 3 Super Silent PSU mod

Ender 3 Super Silent PSU mod

The purpose of the modification is to make the Ender 3 V1 printer as quiet as possible and to place all electronics in a well-ventilated area.

Ingredients :)
-M3x8 screws
-M3 heated inserts (or optionally M4 screws)
-M5x8 screws
-M5 T nuts
-2x80mm fans (for example: Arctic Cooling P8 Silent)
-Noctua NF-A4X20 FLX 4cm
-Skr Mini E3 v2 (Original Creality 4.4.x board has the same mounting holes!)
-2xDC-DC buck converter for 5V and 12V
-Raspberry Pi 4

All elements can be printed without support.

Other conversions of my printer:
-Hero Me Gen6 direct drive with Titan extruder (https://www.printables.com/model/308109-hero-me-gen6-archive)
-Belt Driven Ender 3 (https://kevinakasam.com/belt-driven-ender-3)
-PEI Flexible Build Plate
-Ender 3 Y Motor Mount Reinforced with endstop holder (fixed belt clearance) (https://www.printables.com/model/357180-ender-3-y-motor-mount-reinforced-with-endstop-hold, https://www.thingiverse.com/thing:5761205)
-Ender 3 2020 Profile X-axis, 2040 Y-axis Synchronous Belt Tensioner (https://www.aliexpress.com/item/1005004405718935.html)
-Wire ferrules (https://www.aliexpress.com/item/32845981687.html)
-Supporting Pull Rod Kit (https://www.aliexpress.com/item/1005001998525005.html)
-Heatbed Silicone Leveling Solid Spacer (https://www.aliexpress.com/item/1005002822056299.html)
-Heatbed Insulation Cotton