AED Wall Hanger for Philips Heartstart

Made up a wall hanger for my AED since it did not come with one. Fits on MK3
5
49
1
245
updated December 31, 2022

Description

PDF

Nothing overly advanced, but I wanted something that would hold my AED on the wall. The letters are not only separate bodies, but inset into the wall of the hanger. As such, you do not have to print the letters out, but can simply paint the colors. The printed letters really pop though. Simply glue the letters onto the hanger wall insets with whatever type of adhesive is appropriate to the material you print with.1 Ideal colors in my opinion are red for the body and white for the AED.

Recommend printing the hanger out solid for strength. I used 3D Fuel Re-Fuel Pro, which is a PLA+ or PLA Pro, which is plenty strong. Other good options are the regulars: PETG, CF PETG, ASA, etc.

There are 4 mounting holes. You can either (or both I suppose) mount on either side with appropriate hangers or 2 mounts down the middle. We have stud/drywall construction in the US, so a couple good drywall anchors (perhaps one side in a stud) will hold it up fine. 

Build files included for mods. 

Lower fillet is a compound chamfer/fillet, so no supports needed and it prints out perfectly.

Model origin

The author marked this model as their own original creation.

License