Shield Battery Keychain

I wanted to try out my designing skills, so I made this little shield battery key chain based on the shield battery from Apex Legends.

Use blue filament with parts batt1 and batt3.

Use grey/silver filament with parts batt2, batt4, and batt6.

Use whatever color for batt5. I used purple because it's what I had available, but I think gold would also look great!

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Notes:

I used .175mm layer heights, rather .2mm because I am able to get a bit more detail. .2mm will work just fine, though.

Post-Printing

I sanded down the blue parts using sandpaper from 80grit up to 5000grit. Sanding is optional. Then, I glue everything in place with super glue. The shield emblems were created using a vinyl cutter and some white sticky vinyl.