andrew brady

@andrewbrady_511633

Allows PTFE tube to run through printer frame for use of lid

252

2102

7655

updated January 21, 2023

Federico Paolucci

@Vidrik_2835458

And with that i achieved my firt mod for my Bambu P1P.

RAM.C.

@RAMC_1416808

Printed very well. I wanted to avoid the tube rubbing on the frame, but now it rubs on the rails. I tried to reposition the clamps on the cable and tube, but I can not find any position to avoid the rubbing. Any advice ? (edited)

G 5

GoudaNate

@GoudaNate_1336630

Kind of a useless model for the P1P, it is just better to let the PTFE tube go overtop and hang loose. I would understand using this if you have a cable chain and are enclosing your P1P, but on a stock P1P, which is what I am seeing in the pictures, it is more cumbersome to have the PTFE tube passthrough than not.