#0050 Kids' Artwork Hanger for Display

You and your kids are proud of their artwork, but how do you display them?  And given how many “master pieces” they bring home, you quickly run out of wall space to display them. What to do, what to do?

Introducing the Artwork Hanger.  This little hanger "lives" on the wall with a small nail and easily accepts artwork as they slide into each clip.  And as more and more artwork is brought home, you eventually have to take some previous work down to put up the new ones.  It's a quick print and very useful to help showcase their hard work.

Well, it can also display any kind of artwork, temporary or permanent!

The nail holes are small enough to easily close up with some touch up paint, eventually.

This hanger design makes it very easy and convenient to both pull down old artwork and put up new artwork.

The standard hanger can accept up to 4 clips for added grip, but typically only 2 are needed.

Typical Use:

1. 1x hanger
2. 2x standard clips (up to 4x if desired)
3. Or, 2x small clips (up to 4x if desired)
4. 1x small nail up to 2mm diameter x 15mm length (1.5mm diameter recommended)

Two Sizes of Hangers:

1. Standard Size Hanger (accepts up to 4 clips)
2. Small Size Hanger (accepts 2 clips)

Assembly:

• Install each clip from the back of the hanger.

• Push artwork into each clip.
   

Printing Recommendations:

1. PLA is great for this application.
2. 0.2mm layer.
3. 2 perimeters.
4. I included .3mf file with bed adhesion helpers for your convenience.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!