TP-Link POE Wall Mount

This wall mount is meant for the TP-Link TL-POE150S Injector, used for powering on a device with Power Over Ethernet while not having a compatible network plug available.

For testing purpose I printed this on a layer height of .3mm, however the result will be much better when printed with .10mm or .20mm layer height.

You can see the type of screw I have created the design for. It's a 3mm screw with a head with a diameter of 5.75mm (length does not matter ;-) ).

Print instructions

Printed on the MK3S, no rafts or supports needed. Preferable a layer height of either .2 or .1 and 15% infill.