Gooseneck Arm Adapter for Hands Free SteamDeck

12/30/2022 - Initial posting

This is an adapter to allow hanging the SteamDeck onto a gooseneck arm that can be typically attached to a bedframe, desk, etc. 

To use:

1. Simply insert the SteamDeck into the adapter.
2. Push the side clips into the adapter until they click to hold the deck in place.
3. Use zipties to secure the adapter + SteamDeck to your gooseneck arm. 

The parts print without supports. I suggest PETG with 3 wall thicknesses and 25% infill. See image for part orientation.

CAUTION: Every printer is different and part dimensions can have variability. Once the adapter is attached to the SteamDeck, test the assembly on a soft surface like your bed or your couch to make sure your SteamDeck isn't going to fall out and it securely sits in the adapter.

Feel free to post comments with any questions. Enjoy!