BeeTheFirst+

In this mod, I have changed the way to assemble the stock electronics, use this modification if it is ok to crimp your own cables and mess deeply with 3dprinters if you are a new user don't try these is more likely that you will damage your printer than upgrade it!

I have used Klipper! as a firmware you can see the code on the files

I have used a Bigtreetech board Mantha 4p whit TMC drivers on standalone because the drivers I have in stock are de 2208 and they are standalone only and for it is they are competent. 

Material: 

I think the best one is like prusament pc I have used the prusament pc-cf of course that you have to print the parts in another printer.

Resolution:

I have printed on 0,6 nozzle on 0.3 layer height and with no problems!