Melinoe Cosplay Accessories - Hades II - FDM

All the cosplay bits and bobs needed for Melinoe. I'm so excited to debut this new costume!

The only back references currently available (January 2023) is magnified screenshots of Melinoe from trailer gameplay. I had to guesstimate several things like the size of the pouch clasp and will update this posting if a more detailed back reference is released by Supergiant Games. 

I tried to make all 3D printed pieces removable for easy costume washing. The bigger pieces are attached with velcro/snaps and the smaller ones are attached with glued on magnets that sandwich my textile. If you have any cosplay assembly questions I would be happy to help!

MoonCrown x 1

LaurelLeaf x 18 (depends on how wide your head is)

NeckColumn x 1

CollarMoon x 1

BeltCenter x 1

Tassel x 3 (2 on the belt, 1 on the back of the halter top of the dress)

BeltAccent4 x 1 

BeltAccent1 x 1 

BeltAccent2 x 1

BeltAccent3 x 1 

PouchClasp x 1

Notes going top to bottom:

1. I needed 18 laurel leaves (9 each side) to make my headband. These are adhered onto metal wire bent into shape around my wig. 
2. There is a back tassel at the base of the halter top next to her neck. 
3. The CollarMoon & BeltCenter have locations for 10-12mm male snaps. These were 2-part epoxied into place.
4. BeltCenter also has anchor holes to tie the two belt tassels into. The holes are small and I reinforced the tips with epoxy after threading the tassel tie through them. 
5. There is a 1" webbing channel in BeltAccent1 & Belt Accent2. I glued these onto the webbing which attaches underneath the dress's center sash with velcro. 
6. There are small holes in the BeltAccent2 & BeltAccent3. I used jewelry fittings, chain, and 2-part epoxy to attach them together.
7. BeltAccent4 is attached to the centerline of the back of the belt (see the back reference)
8. The pouch clasp is attached to the upper flap while the string tie is sewn to the bottom. There are two holes to thread lines through and tie closed with a bow.