Pillenspender-Pill Dispenser V2

December 23, 2022

This is a remix of my own pilldispenser https://www.thingiverse.com/thing:5720588

The basic part is the same as the original pill box, without modification.

I redesigned the lids to print with transparent PLA.

Transparent filament doesn't make transparent parts, unfortunately, but if they are thin enough they are at least somewhat translucent.

I put a kind of window in the lid, with 0.4mm thickness. There you can at least see if the corresponding box is empty.

In addition, each lid has a slot in which you can insert a small piece of paper (10x17mm) on the side for labelling. This is then also readable through the transparent material.

As with the original box, a piece of 1.75mm thick filament serves as a hinge, which is melted 3-4mm at both ends.

December 23, 2024: 
I have added the base part in the heights 30mm and 40mm. The lids fit to all base parts.
You can find the parasolid models in the zip-file "Pillendose Parasolid.zip"

Print Settings

Supports: No

Resolution: 0,20mm

Infill: 40%

Filament: PLA, transparent for the lid

Transparent Lids